Start with furthest bleeder from master cylinder, ie And each time the outer nipple was done before the inner nipple Right rear first, then l/r, r/f and l/f.
How to Bleed Brakes: A Step-by-Step Guide
The first step in bleeding your brakes is to jack up the car and remove all four wheels (see pelican technical article
Jacking up your porsche 911.
Disconnect the pressure system from the reservoir Now, get your family member to press down repeatedly on the brake pedal at least five times, and then hold it down Usually a dragging brake means that the caliper pistons are stuck, but it is possible that the right front brake hose is collapsed internally and not letting the fluid fully return when the brakes are. The process usually involves bleeding from the brake screw on the brake caliper by beginning at the left rear wheel, then bleeding the right rear wheel, then the left front wheel, and then the right front wheel.
The brake pedal must not be operated as long as the brake. The procedure for bleeding brakes used to be start with the wheel furthest from the master cylinder and work your way to the closest wheel, but brake systems have gotten more complex and. This diy will cover the basic procedure to flush the brake fluid on almost any modern porsche or other vehicle. My reservoir is on the right wing so my order was
